10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 1 copyright vincotech maximum ratings t j = 25 c, unless otherwise specified parameter symbol condition value unit collector-emitter voltage v ces 1200 v collector current i c t j = t jmax t s = 80 c 150 a repetitive peak collector current i crm t p limited by t jmax 450 a total power dissipation p tot t j = t jmax t s = 80 c 242 w gate-emitter voltage v ges 20 v short circuit ratings t sc t j 150 c 10 s v cc v ge = 15 v 800 v maximum junction temperature t jmax 175 c flow npc 1 1200 v / 150 a high dc link voltage applications 1200 v components split npc thermistor la18f08 la28f08 solar 10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 la18f08 la28f08 flow 1 17mm housing schematic features target applications types buck switch / boost switch
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 2 copyright vincotech maximum ratings t j = 25 c, unless otherwise specified parameter symbol condition value unit buck diode peak repetitive reverse voltage v rrm 1200 v continuous (direct) forward current i f t j = t jmax t s = 80 c 120 a total power dissipation p tot t j = t jmax t s = 80 c 189 w maximum junction temperature t jmax 175 c boost diode protection peak repetitive reverse voltage v rrm 1200 v continuous (direct) forward current i f t j = t jmax t s = 80 c 33 a surge (non-repetitive) forward current i fsm 50 hz single half sine wave t j = 150 c 170 a surge current capability i 2 t t p = 10 ms 145 a 2 s total power dissipation p tot t j = t jmax t s = 80 c 73 w maximum junction temperature t jmax 175 c boost diode / buck sw. protection diode peak repetitive reverse voltage v rrm 1200 v continuous (direct) forward current i f t j = t jmax t s = 80 c 47 a surge (non-repetitive) forward current i fsm 50 hz single half sine wave t j =150c 270 a surge current capability i 2 t t p = 10 ms 365 a 2 s total power dissipation p tot t j = t jmax t s = 80 c 101 w maximum junction temperature t jmax 175 c polarity rectifier diode / boost sw. protection diod e peak repetitive reverse voltage v rrm 1600 v continuous (direct) forward current i f t j = t jmax t s = 80 c 49 a surge (non-repetitive) forward current i fsm 50 hz single half sine wave t j = 150 c 490 a surge current capability i 2 t t p = 10 ms 1200 a 2 s total power dissipation p tot t j = t jmax t s = 80 c 74 w maximum junction temperature t jmax 150 c
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 3 copyright vincotech maximum ratings t j = 25 c, unless otherwise specified parameter symbol condition value unit module properties thermal properties storage temperature t stg -40+125 c operation temperature under switching condition t jop -40( t jmax - 25) c isolation properties isolation voltage v isol dc test voltage t p = 2 s 4000 v creepage distance min. 12,7 mm clearance 8,68 mm comparative tracking index cti > 200
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 4 copyright vincotech characteristic values parameter symbol conditions value unit v ge [v] v gs [v] v ce [v] v ds [v] v f [v] i c [a] i d [a] i f [a] t j [c] min typ max buck switch / boost switch static gate-emitter threshold voltage v ge(th) v ge = v ce 0,0052 25 5,3 5,8 6,3 v collector-emitter saturation voltage v cesat 15 150 25 1,78 2,05 2,42 v collector-emitter cut-off current i ces 0 1200 25 2 a gate-emitter leakage current i ges 20 0 25 240 na internal gate resistance r g none ? input capacitance c ies f = 1 mhz 0 25 25 8800 pf reverse transfer capacitance c res 470 thermal thermal resistance junction to sink r th(j-s) phase-change material = 3,4 w/mk 0,39 k/w buck diode static forward voltage v f 150 25 2,17 2,49 v 150 2,11 reverse leakage current i r 1200 25 240 a 150 28000 thermal thermal resistance junction to sink r th(j-s) phase-change material = 3,4 w/mk 0,50 k/w boost diode protection static forward voltage v f 35 25 2,30 2,62 v 150 2,29 reverse leakage current i r 1200 25 60 a 150 5500 thermal thermal resistance junction to sink r th(j-s) phase-change material = 3,4 w/mk 1,30 k/w
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 5 copyright vincotech characteristic values parameter symbol conditions value unit v ge [v] v gs [v] v ce [v] v ds [v] v f [v] i c [a] i d [a] i f [a] t j [c] min typ max boost diode / buck sw. protection diode static forward voltage v f 50 25 2,19 2,54 v 150 2,21 reverse leakage current i r 1200 25 60 a 150 8800 thermal thermal resistance junction to sink r th(j-s) phase-change material = 3,4 w/mk 0,94 k/w polarity rectifier diode / boost sw. protection diod e static forward voltage v f 50 25 1,22 1,8 v 125 1,48 reverse leakage current i r 1600 25 50 a 145 1100 thermal thermal resistance junction to sink r th(j-s) phase-change material = 3,4 w/mk 0,94 k/w thermistor rated resistance r 25 22 k? deviation of r 100 r/r r 100 = 1484 ? 100 -5 5 % power dissipation p 25 5 mw power dissipation constant 25 1,5 mw/ k b-value b (25/50) 25 3962 k b-value b (25/100) tol. 1 % 25 4000 k vincotech ntc reference i tol. 1 %
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 6 copyright vincotech date code ul & vin lot serial wwyy ul vin lllll ssss type&ver lot number serial date code tttttttvv lllll ssss wwyy pin x y function 1 53 9 gnd 2 53 6 gnd 3 53 3 gnd 4 53 0 gnd 5 38,8 0 dc+ 6 35,8 0 dc+ 7 38,8 3 dc+ 8 35,8 3 dc+ 9 20,55 0 g11 10 20,55 3 s11 11 0 29 ph 12 3 29 ph 13 6 29 ph 14 9 29 ph 15 10,1 25,95 s13 16 13,1 24,95 g13 17 18 19 47 29 therm1 20 50 29 therm2 21 53 29 dc- 22 53 26 dc- 23 53 23 dc- 24 53 20 dc- not assembled not assembled ordering code 10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 pin table [mm] name nn-nnnnnnnnnnnnnn-ttttttvv outline text datamatrix version without thermal paste 17mm housing with solder pins without thermal paste 17mm housing with solder pins ordering code & marking nn-nnnnnnnnnnnnnn ttttttvv wwyy ul vin lllll ssss high side module (10-f124nib150sh02-la18f08)
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 7 copyright vincotech pinout boost switch identification comment 1200 v voltage current function 1200 v 150 a buck switch 150 a 50 a polarity rectifier diode d15 id d13 d43 igbt igbt component d41 fwd d12 fwd t11 t13 1200 v 35 a 1200 v d11 fwd rt ntc thermistor 150 a buck diode boost diode protection 50 a boost diode 50 a fwd 1600 v fwd 1200 v 1600 v buck sw. protection diode fwd 1200 v 50 a boost sw. protection diode high side module (10-f124nib150sh02-la18f08)
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 8 copyright vincotech pin x y function 1 53 9 gnd 2 53 6 gnd 3 53 3 gnd 4 53 0 gnd 5 6 41,15 0 dc- 7 38,15 0 dc- 8 35,15 0 dc- 9 32,15 0 dc- 10 38,75 3 therm1 11 35,75 3 therm2 12 12,9 2,55 s12 13 9,9 3,55 g12 14 0 20 ph 15 0 23 ph 16 0 26 ph 17 0 29 ph 18 14,15 18,55 g14 19 17,15 17,55 s14 20 21 22 53 29 dc+ 23 53 26 dc+ 24 53 23 dc+ 25 53 20 dc+ not assembled not assembled not assembled outline pin table [mm] low side module (10-F124NIC150SH02-LA28F08)
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 9 copyright vincotech rt ntc thermistor d16 fwd 1600 v 50 a polarity rectifier diode d44 fwd 1600 v 50 a boost sw. protection diode d42 fwd 1200 v 50 a buck sw. protection diode d14 fwd 1200 v 50 a boost diode d11 fwd 1200 v 35 a boost diode protection d12 fwd 1200 v 150 a buck diode t14 igbt 1200 v 150 a boost switch t12 igbt 1200 v 150 a buck switch pinout identification id component voltage current function comment low side module (10-F124NIC150SH02-LA28F08)
10-f124nib150sh02-la18f08 10-F124NIC150SH02-LA28F08 target datasheet 25 jul. 2016 / revision 1 10 copyright vincotech disclaimer the information, specifications, procedures, method s and recommendations herein (together information ) are presented by vincotech to reader in good faith, are believed to be accurate a nd reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. vincotech reserves the rig ht to make any changes without further notice to an y products to improve reliability, function or design. no representation, guarantee or warranty is made to reader as to the accuracy, rel iability or completeness of said information or that the application or use of any o f the same will avoid hazards, accidents, losses, d amages or injury of any kind to persons or property or that the same will not infringe thir d parties rights or give desired results. it is rea ders sole responsibility to test and determine the suitability of the information and the product for readers intended use. life support policy vincotech products are not authorised for use as cr itical components in life support devices or system s without the express written approval of vincotech. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implan t into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for u se provided in labelling can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, o r to affect its safety or effectiveness. packaging instruction standard packaging quantity (spq) 100 >spq standard |
